12
D-Link DCS-4602EV User Manual
Section 2: Installation
Using the DCS-37-1 Mount (optional)
To mount the camera with the DCS-37-1 mount, follow the instructions below.
Step 2
Use the provided screws to mount the DCS-37-1 to the wall.
Step 1
Place the DCS-37-1 mounting sticker in the desired location, then use a 6 mm drill bit to drill
the required holes 25 mm deep and insert the wall anchors into the holes. If you plan to pass
cables through the wall, you will also need to drill a hole for the cable channel.
Note:
The camera in the corresponding graphics may be different from your product, but the
basic process is the same.
Step 3
Guide the camera connectors through the back or bottom cable channel on the DCS-37-1.
Then screw the mounting plate to the bracket using the set of mounting holes marked
B
.
