The Bit Rate is a little tricky. Setting it too high will use too much upload bandwidth, causing
failed uploads; setting it too low will affect the video quality. You can use our bandwidth
calculator to estimate the bandwidth. Visit www.cameraftp.com, click Pricing, and then
customize a service plan. See the screenshot below. (Note for estimating the bandwidth, Number
of Cameras should be set to 1.)
For the video plan of 1280x720, 5 frames/s, the estimated bandwidth is 486Kbps. So you can set
it to 512Kbps.
Click Save Settings (not to be confused with another Save button) to save the video profile.
Step 4. Configure Motion Detection Settings
If you ordered a plan with Motion Detection enabled, then you must configure Motion Detection.
Click Motion Detection as shown below. Check the "Enable Video Motion" checkbox. You can
draw a motion detection area and click Save Settings.
