D-Link DAP-X1870 User Manual
42
Section 4 - Wi-Fi Mesh Setup
Step 1
Connect and plug in the
DAP-X18
7
0
close to your Wi-Fi Mesh router and
wait for the LED light to blink orange.
Step 2
Use the Ethernet cable to connect the
DAP-X18
7
0
to one of the LAN ports on
the Wi-Fi Mesh router. The pairing process may take a few minutes. The
status and the signal indicator LEDs on the
DAP-X18
7
0
will turn solid green
once it has finished pairing with your Wi-Fi Mesh router.
Step 3
Disconnect
the
Ethernet
cable
and
place
the
Wi-Fi
Mesh
compatible
device
anywhere in your home to extend your home Wi-Fi.
< 1 m
Setup Using an Ethernet Cable
