D-Link DAP-X1870 User Manual
37
Section 3 - Configuration
System
This page allows
you to save or restore your system configuration, reset, or reboot the
DAP-X18
7
0
. To access this page, click
the
Management
drop down menu at the top of the page, and select
System
.
Save Settings To Local
Hard Drive
Load Settings From
Local Hard Drive
Restore to Factory
Default Settings
Save the system settings onto a file to the local hard drive. You
will then see a file dialog where you can select a location and
enter a file name for the configuration file.
Load the system settings from a previously saved file on the
local hard drive. Click the
Restore
button that appears after
loading the system settings file to load the settings.
Restore
the
system
settings
to
factory
default
settings. This
will erase all currently stored settings.
Reboot the Device
Click
Reboot
to reboot the
DAP-X18
7
0
.
