D-Link DAP-X1870 User Manual
13
Section 2 - Installation
Assessing Uplink Signal Strength
The Status/WPS LED will turn solid green when the
DAP-X18
7
0
has connected successfully to a wireless network and is
extending that network. If the Smart Signal LED has a single orange bar after the connection process has finished, the DAP-
X1870 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To
improve the connection quality, the
DAP-X18
7
0
should be relocated closer to the source wireless router. Using the 5 GHz
extension network is recommended in order to achieve the fastest wireless speeds. If the extender has been configured as an
Access Point and is connected via Ethernet cable to an uplink network, the Smart Signal LED will not be lit.
