46
D-Link DAP-3712 User Manual
Section 3 - Configuration
Link Test
The DAP-3712 has a built-in Iperf function. Users can configure the DAP-3712 in
Iperf Server Mode
. Then the Iperf client can connect to the Iperf
server to verify the speed between the two links. In client mode, you can assign an Iperf server IP address to check the speed between the two links.
Select Client or Server
If you select Iperf Dual, the DAP-3712 will conduct
a bi-directional speed test. Otherwise, it only test
the speed of transmission from the Iperf client to
the Iperf server.
Enter the Iperf server’s IP address.
Enter the number of threads during the test.
Enter how long the speed test should last.
Enter the interval to wait between the tests.
Iperf Type:
Iperf Dual:
Iperf Server:
Iperf Thread:
Iperf Time:
Iperf Interval:
