D-Link DAP-3662 User Manual Download Page 78

Page: 78 / 94

D-Link DAP-3662 User Manual

Section 3 - Configuration

Maintenance

Administrator Settings

Check one or more of the six main categories to display the various hidden administrator parameters and settings displayed on the next six

windows.

Limit Administrator

VLAN ID:

Limit Administrator IP:

IP Range:

Check the box and then enter the specific VLAN ID that the

administrator will be allowed to log in from.

Check to enable the Limit Administrator IP address.

Enter the IP address range that the administrator will be

allowed to log in from and then click the

Add

button.

System Name:

Location:

The name of the device. The default name is

D-Link DAP-3662

The physical location of the device, e.g. “office”.

System Name Settings

Summary of Contents for DAP-3662































































































Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands

D-Link DAP-3662, User Manual

Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands