D-Link DAP-3662 User Manual Download Page 66

Page: 66 / 94

D-Link DAP-3662 User Manual

Section 3 - Configuration

WLAN Partition

Wireless Band:

Link Integrity:

Ethernet to

WLAN Access:

Internal Station

Connection:

Displays the current wireless band.

Select

Enable

Disable

If the Ethernet connection

between the LAN and the AP is disconnected, enabling

this feature will cause the wireless segment associated

with the AP to be disassociated from the AP.

The default is

Enable

. When disabled, all data from the

Ethernet to associated wireless devices will be blocked.

Wireless devices can still send data to the Ethernet.

The default value is

Enable

, which allows stations to

intercommunicate by connecting to a target AP. When

disabled, wireless stations cannot exchange data on the

same Multi-SSID. In Guest mode, wireless stations cannot

exchange data with any station on your network.

The DAP-3662 features a wireless partition. Once a user is finished with these settings, click the

Save

button to let the changes take effect.

Summary of Contents for DAP-3662































































































Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands

D-Link DAP-3662, User Manual

Search results

Summary of Contents for DAP-3662

Reviews:

Related manuals for DAP-3662

Brands by name

Popular brands