DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
In the
Wi-Fi / Basic Settings
section, you can change basic parameters for the wireless interface
of the access point and configure the basic and additional wireless networks.
Figure 82. Basic settings of the wireless LAN.
In the
General Settings
section, the following parameters are available:
Parameter
Description
Enable Wireless
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
Country
The country you are in. Select a value from the drop-down list.
Wireless mode
Operating mode of the wireless network of the access point. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the access point itself choose the
channel with the least interference.
Page
92
of 175
