DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
WAN Reservation
This page is available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard.
On the
Connections Setup / WAN Reservation
page, you can enable the WAN backup
function, which provides you with uninterrupted access to the Internet. When your main connection
breaks down, the access point activates the backup connection; and when the main channel is
recovered, the access point switches to it and disconnects the reserve one.
Figure 81. The
Connections Setup / WAN Reservation
page.
To activate the backup function, create the main and the reserve WAN connections. After that go to
the
Connections Setup / WAN Reservation
page, move the
Enable
switch to the right, and
specify the needed values in the fields displayed on the page.
Page
90
of 175
