DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
URL Filter
On the
Firewall / URL Filter
page, you can specify restrictions on access to certain web sites.
Figure 124. The
Firewall / URL Filter
page.
To enable the URL filter, in the
General Settings
section, move the
Enable
switch to the right,
then select the needed mode from the
Type
drop-down list:
•
Block listed URLs
: when this value is selected, the access point blocks access to all
addresses specified in the
Filters
section;
•
Block all URLs except listed
: when this value is selected, the access point allows access
to addresses specified in the
Filters
section and blocks access to all other web sites.
Click the
APPLY
button.
To specify URL addresses to which the selected filtering mode will be applied, in the
Filters
section, click the
ADD RULE
button and enter a relevant address in the displayed line. Then click
the
APPLY
button.
To remove an address from the list of URL addresses, click the
Delete
icon ( ) in the line of the
relevant URL address. Then click the
APPLY
button.
Page
150
of 175
