DAP-300P
Wireless N300 PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Remote Access
This page is available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard.
On the
Advanced / Remote Access
page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
Figure 112. The
Advanced / Remote Access
page.
To create a new rule, click the
ADD
button (
).
Figure 113. The window for adding a rule for remote management.
Page
134
of 175
