78
D-Link DAP-2620 User Manual
Web User Interface
Limit Administrator
VLAN ID
Check the box and the enter the specific VLAN
ID that the administrator will be allowed to log
in from.
Limit Administrator IP
Check the box to enable the limit administrator
IP address.
IP Range
Enter the IP address range that the
administrator will be allowed to log in from and
then click
Add
.
Note:
To save the new configuration settings to the firmware, click
Configuration
>
Save and Activate
, otherwise click
Discard Changes
to
delete any setting change.
Limit Administrator
Check one or more of the eight main categories to display the various hidden administrator parameters and settings displayed on the next five
pages. Each of the eight main categories display various hidden administrator parameters and settings.
System Name Settings
System Name
Enter the name of the device. The default name
is D-Link dap2620.
Location
Enter the physical location of the device, e.g.
72nd Floor, D-Link HQ.
MDNS Name
Enter the name of the multicast DNS. The
default name is dap2620.
Note:
To save the new configuration settings to the firmware, click
Configuration
>
Save and Activate
, otherwise click
Discard Changes
to
delete any setting change.
