D-Link DAP-2610 User Manual
36
Intrusion
The
Wireless Intrusion Protection
window is used to set your APs to
All, Valid, Neighborhood, Rogue,
and
New
. Click the
Save
button to let
your changes take effect.
Wireless Band:
Detect:
AP List:
Save:
Select
2.4GHz
or
5GHz
.
Click this button to initiate a scan of the
network.
Click the drop-down menu to select
All
,
Valid
,
Neighbor
,
Rogue
, and
New
. The
following is a definition of the listed AP
categories:
Valid
: An AP which is authenticated to
the network with encryption is classified
as valid.
Neighbor
: A detected AP with a weak
signal strength is classified as a suspect
neighbor.
Rogue
: An AP that has been installed
on the secure network without explicit
authorization.
New
: An alternative category.
From the AP List, select a detected
AP and click
Set as Valid, Set as
Neighborhood, Set as Rogue,
or
Set
as New
to manually define the category
type for the AP. Alternatively, click the
radio button to mark all new access
points as valid or rogue.
Click to save the updated configuration.
To make the updates permanent, click
Configuration > Save and Activate
.
