D-Link DAP-2610 User Manual
18
Wireless Band:
Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
Site Survey:
Select either
2.4 GHz
or
5 GHz
from the drop-down
menu.
Wireless Client
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is
dlink
. The SSID can
be easily changed to connect to an existing wireless
network.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in Wireless Client mode.
The channel used will be displayed, and matches the
AP that the DAP-2610 is connected to when set to
Wireless Client mode.
Click the drop-down menu to select
20 MHz, Auto
20/40 MHz
or
Auto 20/40/80 MHz
. Select
20 MHz
if
you are not using any 802.11n wireless clients.
Auto
20/40 MHz
allows you to connect to both 802.11n
and 802.11b/g or 802.11a wireless devices on your
network.
Click on the
Scan
button to search for available
wireless networks, then click on the available network
that you want to connect with.
Wireless Client Mode
