DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Configuring Wireless Network
1. On the
Wireless Network 2.4 GHz
page, in the
Network name
field, specify your own
name for the wireless network or leave the value suggested by the extender.
2. In the
Password
field, specify your own password for access to the wireless network or
leave the value suggested by the extender (see the field
Password
on the back panel of the
device).
3. If the extender is used as a Wi-Fi client, you can specify the same parameters of the wireless
network as specified for the network to which you are connecting. To do this, click the
USE
button (available for the
Repeater
mode).
4. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the
RESTORE
button.
Figure 37. The page for configuring the wireless network.
5. Click the
NEXT
button to continue or click the
BACK
button to specify other settings.
6. On the
Wireless Network 5 GHz
page, specify needed settings for the wireless network
in the 5GHz band and click the
NEXT
button.
Page
45
of 125
