DAP-1520
Wi-Fi Dual Band Range Extender
If any of the above items are missing, contact your reseller.
Package Contents
• DAP-1520 Wi-Fi Dual Band Range Extender
• Wi-Fi Configuration Card
• Quick Install Guide
Product Overview
Recommended Placement
LED
Color
Status
Description
Power/Status LED
Green
Solid
Successfully connected to a wireless router or AP.
Blinking
The device is processing a connection when the
WPS button is pushed.
Amber
Solid
The device has a poor connection to the router
Blinking
Not connected to a wireless router or access point.
Red
Solid
The device is booting up.
Off
The device is not receiving power. Try a different
outlet.
Connect to Your Router Using WPS
Thank you for purchasing the DAP-1520 Wi-Fi Dual Band Range
Extender. Follow the easy steps in this guide to set up your extender.
1
Find an available outlet near your wireless router. Plug the
DAP-1520 in and wait until the LED is blinking amber.
2
Press the
WPS button
on your wireless router or access point.
Within one minute, press the
WPS button
on your DAP-1520.
The LED will start to blink.
3
4
When the LED turns solid green, this indicates that the DAP-1520 is
securely connected to your wireless router or access point.
You can now unplug and move the DAP-1520 to a location
between your wireless router and the area that you need
wireless coverage.
If the LED is solid amber after the connection process has finished, the
DAP-1520 has established a poor quality connection to the router. To
improve the connection quality, the DAP-1520 should be relocated to
an outlet closer to the wireless router or AP.
5
Reset Button
Wi-Fi Protected Setup
(WPS) Button
From your wireless device, go to the Wireless Utility to display
the available wireless networks and select the
Wi-Fi Network
Name
(SSID) for the DAP-1520.
When using WPS to connect to the router, the SSID on the
DAP-1520 will automatically be assigned the following:
• 2.4GHz: (Your Router’s SSID)-EXT
• 5GHz: (Your Router’s SSID)-EXT5G
The Wi-Fi password for your router will be the same password
for the DAP-1520.
To connect additional Wi-Fi devices to the DAP-1520, repeat
this step.
6
Your device is now connected to the DAP-1520. If you want
to change your network settings, password, etc., follow the
steps under
Configure the DAP-1520 Using a Web Browser
to
connect
and configure the DAP-1520.
Your setup is complete!
Before You Begin
• Make sure the area that you want to plug the extender into has a solid
connection to your router. Use a wireless laptop, tablet, or mobile phone
in that area to test the connection to verify.
• If your wireless router or access point does not support WPS, follow the
steps under
Configure the DAP-1520 Using a Web Browser
to connect
to the DAP-1520 and run the Setup Wizard. If you are not sure how to
enable WPS on your wireless router, please refer to your router user
manual.
Connect Your Wireless Devices
Poor
location
Ideal
location
!
!
!
Poor
location
Ideal
location
!
!
!
A Range Extender only works as well as the signal it is extending.
Therefore, proper placement of your DAP-1520 is important in
achieving desired results.
For best performance, place your DAP-1520 in between your
router and your dead zone, making sure it’s placed in a location
where the Wi-Fi signal is still strong.
Ideal Placement
Wireless
Router
Wireless
Router
LED
(Front)
