DAP-1360
Wireless N300 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
Figure 63. The
System / Telnet
page.
To disable access via TELNET, deselect the
On
checkbox and click the
Apply
button.
To enable access via TELNET again, select the
On
checkbox. In the
Port
field, enter the number of
the
access point
's port through which access will be allowed (by default, the port
23
is specified).
Then click the
Apply
button.
Page
89
of 270
