41
D-Link DAP-1260L User Manual
Section 3 - Configuration
PPTP
Choose PPTP (Point-to-Point Tunneling Protocol) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
PPTP IP Address:
PPTP Subnet Mask:
PPTP Server IP
Address:
Username:
Password:
MTU Size:
Attain
DNS Automarically:
Set DNS
Automatically:
DNS Servers:
Clone MAC Address:
Enter the IP address (Static PPTP only).
Enter the subnet mask.
Enter the Server IP Address provided by your
ISP.
Enter your PPTP username.
Enter your PPTP password and then retype the
password in the next box.
You may need to change the MTU (Maximum
Transmission Unit) for optimal performance
with your specific ISP. The default MTU size is
1400.
Select this option if you want the DAP-1260L
get DNS server IP address automatically.
Select this option if you want to manually
enter the DNS Server IP address(es). Fields to
enter the Primary and Secondary DNS server IP addresses will appear after you select this option.
Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.
The default MAC address is set to the MAC address on the AP (Access Point). You can click the
Clone.Your.PC’s.MAC.Address
button to replace the AP’s MAC address with the MAC address of your Ethernet card. It is not recommended that you change
the default MAC address unless required by your ISP.
