background image

1

This product can be set up using
a current java-enabled web
browser, i.e., Internet Explorer or
Netscape Navigator.

DI-707P

Ethernet Broadband

Router and Print Server

5V DC Power Adapter

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and

specifications subject to change without notice. DI-707P.08082003

Before You Begin

1.

If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).

2.

It’s best to use the same computer that is connected to your modem for configuring
the DI-707P Broadband Router. The DI-707P acts as a DHCP server and will assign
all the necessary IP address information on your network. 

See Appendix at the

end of this Quick Installation Guide or the Manual on the CD-ROM for setting
each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-707P Ethernet Broadband Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight-Through) Cable

        Using a power supply
        with a different voltage
rating will damage and void
the warranty of this product.

If any of the above items are missing, please contact your reseller.

Summary of Contents for D DI-707P DI-707P

















Reviews: