22
D-Link COVR-P2502 User Manual
Section 3 - Configuration
Settings
Extender
The
Extender
page allows you to configure Covr-specific and extended
Wi-Fi settings. From here you can choose the existing uplink network, set Covr
features, and configure basic settings for the extended Wi-Fi network.
In the Settings menu on the bar on the top of the page, click
Extender
.
Existing Network
Existing Network:
Indicates if the uplink is connected by either Ethernet or Powerline.
Covr Wi-Fi System
Status:
Indicates the status of the seamless Covr Wi-Fi system. This feature
cannot be disabled.
MU-MIMO:
Click to enable or disable Multi-User Multiple Input Multiple Output
(MU-MIMO). Enabling this feature will allow the extender to
communicate with multiple devices at once for faster and more
efficient throughput. It is recommend to leave this feature enabled.
Extended Wi-Fi
Wi-Fi Name (SSID):
Enter a name for the extended Wi-Fi network.
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Schedule:
Use the drop-down menu to select the time schedule that the
Wi-Fi network will be enabled for. The schedule may be set to
Always
Enable
, or you can create your own schedules in the
Schedule
section. Refer to
for more information.
