For more support, please visit:
support.dlink.ca/COVR-3902
1.800.361.5265
Antenna x4
Covr Router
COVR-2600R
Wi-Fi
Card
Covr Extender
COVR-1300E
Power
Adapter x2
Ethernet
Cable
Before You Start
1
Browser Setup (PC/Mac/Mobile device)
D-Link Wi-Fi App (iOS and Android Devices)
1
You can use either a wired (Ethernet) or wireless (Wi-Fi)
connection to set up your Covr Wi-Fi System.
Wired
– Connect the Ethernet port on your computer to
one of the four black ports on the Covr Router.
Wireless
– Connect to the Covr Wi-Fi using the Wi-Fi Name and
Password on the Wi-Fi Configuration Card or the Covr Router.
2
Type
http://covr.local./
into a web browser and follow the
instructions to complete the setup.
Check the contents of your Covr Wi-Fi System with
the list on the right. Be sure to keep the Router and
Extender close to each other during the setup process.
Connect the four antennas to the router by screwing
them in clockwise.
Download the
D-Link Wi-Fi
app from the App Store or
Google Play. Run the app and tap Add Device to get started.
There are two easy ways to configure your
Covr Wi-Fi System:
AC3900 WHOLE HOME WI-FI SYSTEM |
COVR-3902
Simple
Setup
Guide
1
2
Connect the power adapter to the Covr Router and
plug it into a power outlet. Wait for the 2.4G and 5G
LEDs to light up solid green and then proceed to the
next step.
TIP:
If the Power LED does not light up, press the
Power button on the back of the Router.
3
D-Link Wi-Fi
Version 1.02(CA) | 2017/06/29 6CV3902...D3G
