background image

 

1

 

 

Note:  The installation screenshots were taken in Windows XP.  For other OS, the 
installation procedure will be exactly the same but the screenshots will differ.

 

Contents of Package: 

• 

DWL-5000AP Access Point 

• 

Power Supply – 5V DC, 2.5A* 

• 

Manual on CD 

• 

Printed Quick Installation Guide 

• 

Console Cable  

• 

Power Cable

 

 

*Using a power supply with a different voltage rating will 
damage and void the warranty for this product. If any of the 
above items are missing, please contact your reseller.

 

 

System Requirements: 

• 

Internet Explorer or Netscape Navigator version 4 and higher with Java 
Script enabled.

 

• 

Computer with Windows; Macintosh; or Linux-based operating system with 
an installed Ethernet adapter.

 

 

 

 

 

• 

Connect the power supply to the power cable.  

• 

Connect the power supply to the DWL-5000AP. 

• 

Connect the power cable to an electrical outlet. 

• 

Connect an Ethernet cable (cross-over) to the 

Ethernet

 port of the DWL-

5000AP. 

 

• 

Connect the other end of the Ethernet cable to the computer with the 

installed Ethernet adapter. 

• 

Turn your computer on. 

The

 

Ethernet LED being on will indicate the 

connection to the computer.

 

Connecting DWL-5000AP  

Summary of Contents for AirPro DWL-5000AP









Reviews: