background image

This product can be set up using

This product can be set up using

This product can be set up using

This product can be set up using

This product can be set up using
an

an

an

an

any curr

y curr

y curr

y curr

y curren

en

en

en

ent W

t W

t W

t W

t Web br

eb br

eb br

eb br

eb browser

owser

owser

owser

owser, i.e

, i.e

, i.e

, i.e

, i.e.,

.,

.,

.,

.,

Internet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Internet Explorer 6 or Netscape

Internet Explorer 6 or Netscape
N

N

N

N

Navi

avi

avi

avi

avigator 6.2.3 or later

gator 6.2.3 or later

gator 6.2.3 or later

gator 6.2.3 or later

gator 6.2.3 or later.....

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.

Software and specifications subject to change without notice. DWL-7200AP. 09102004

Before You Begin

Check Your Package Contents

DWL-7200AP 

Air

Premier

 AG

Wireless Access Point

If any of the above items are missing, please contact your reseller.

The default IP address for the DWL-7200AP is 

192.168.0.50

 with a subnet mask of

255.255.255.0

. For the purpose of configuring the DWL-7200AP you will need to assign

your computer a static IP address within the same range as the DWL-7200AP’s IP
address.  

See the Manual on the CD-ROM if you need assistance in assigning a static

IP address for your network adapter.

DWL-7200AP

D-Link 

Air

Premier

TM

 AG

Tri-mode Dualband Wireless

Access Point

CD-ROM with Manual

Ethernet (CAT5e UTP/Straight-Through) Cable

        Using a power adapter
        with a different voltage
rating will damage and void
the warranty of this product.

Power Adapter

PoE Base Unit

Power Cord

Summary of Contents for AirPremier DWL-7200AP













Reviews: