DIR-842V2
AC1200 Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
Page
179
Remote Update
!
Attention! Do not turn off the router before the firmware update is completed. This may
cause the device breakdown.
To update the firmware of the router remotely, follow the next steps:
1.
On the
Management / Firmware Update
page, in the
Remote Update
section, click
the
CHECK FOR UPDATES
button to check if a newer firmware version exists.
2.
Click the
UPDATE FIRMWARE
button (the button is displayed if a newer version of the
firmware is available).
3.
Wait until the router is rebooted (about one and a half or two minutes).
4.
Log into the web-based interface using the login (
admin
) and the current password.
If after updating the firmware the router doesn't work correctly, please restore the factory default
settings. To do this, click the
Factory
button on the
Management / Administration
page. Wait
until the router is rebooted.
