D-Link 0790069323058 User Manual Download Page 18

Page: 18 / 101

D-Link DAP-1360 User Manual

Section 2 - Installation

WISP Client Router Mode

In the WISP Client Router mode, the DAP-1360 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this

mode, the DAP-1360 also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and

a DHCP server to generate IP addresses for wired clients only. NAT and the DHCP server allow many computers to share the

same wireless Internet connection.

If you are a WISP subscriber and want to access your WISP account using wired computers, connect your computers to the

DAP-1360 to get NAT, and then connect them to the WISP AP.

Internet

Computer

DAP-1360

(In WISP Client Mode)

WISP Outdoor AP

Connecting Wired PCs to the Internet Using the DAP-1360

Summary of Contents for 0790069323058






































































































Search results

Summary of Contents for 0790069323058

Reviews:

Brands by name

Popular brands

D-Link 0790069323058, User Manual

Search results

Summary of Contents for 0790069323058

Reviews:

Brands by name

Popular brands