Re f r i g e r a n t C h i l l e r M a n u a l
w w w.t h e a q u a r i u m s o l u t i o n .c o m
5
INSTALLATION
When the chiller carton is unpacked, check to see if the chiller is the right model and that no damage to the unit
has occurred during transportation. You should also check that all spare parts and accessories are included as
listed below.
1. PLEASE CHECK THE CONTENTS OF THE PACKAGE:
D-D DC Series Chiller - 1 set.
Instruction manual - 1 piece.
Water inlet & outlet connector - 2 pieces.
EU Plug and UK fused plug adaptor - 1 piece (not included on DC4000 model)
2. INSTALLATION POSITION:
(1) Do not install the chiller outdoors. (Fig.1)
(2) Select a position as cool as possible and keep the unit away from flammable sources, high temperature,
direct sunshine, moisture or dust. (Fig.2)
(3) Place the unit on a horizontal stable surface. (Fig.3)
(4) Install at least 20-40cm away from any wall or structure for venting. (Fig.4)
(5) Do not cover the chiller whilst it is working, avoid shaking or colliding with other objects directly.
(6) This chiller does not have a built-in water pump and so a suitable pump to circulate water is required as
indicated in the specification table. The pump head pressure should be no more than 8m maximum and
should be fitted with a pre-filter. If other equipment out of specification is used, it may cause water leakage
or other damage. (Fig.6)
(7) Never store or stand the chiller upside down or on its side as this may damage the unit. If it has been stored
in this orientation, then stand the correct way up and wait for at least 20 minutes before starting. (Fig.7)
EN