10
222-914-0009-EN5
4.2
D-BOX HaptiSync Processor
The D-BOX HaptiSync Processor is located at the back of the chair right beside the haptic module:
TO HAPTIC SYSTEM
Used to connect the IEC power cable to the D-BOX Haptic Module.
POWER
Used to connect the IEC power cable to the wall outlet.
ETHERNET
Used to connect a LAN cable when connecting to a wired LAN network.
Not required when using Wi-Fi.
TO HAPTIC SYSTEM (USB PORT)
Used to connect the USB cable to the D-BOX Haptic Module or to a Windows PC (optional).
AUDIO IN
Used to connect a 3.5mm analog stereo audio source to sense the audio content. Also available on the
Control Panel.
Not required when using the integrated sound sensor feature.
Connected from factory. Do not disconnect.
