ROBOT . HEAD to TOE
Product User’s Manual –
Shield-Servo
6. INSTALLATION SOFTWARE
There are 2 options of sample software being provided for Shield-Servo. The simplest way is to
use sample program for Arduino, while another option is the use sample GUI program to control
Servo motors through Shield-Servos.
6.1 Sample Program for Computer
To ease user in using Shield-Servo, Cytron Technologies has developed a
using VB.net for user to control Shield-Servo from computer through virtual COM Port. The
following steps will guide user to run Shield-Servo GUI and use it.
1. Extract the zipped file which can be downloaded from
.
2. Double click on “setup.exe” to run the Shield-Servo GUI. The window shown as
below may prompt out, click Install.
3. If the program is unable to be executed, the latest .NET Framework may be needed to
be installed. It is downloadable from Microsoft official website.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
14
