3.5.2
Kvick Lab packet and holder
Introduction
Kvick Lab packet and holder can be used with ÄKTA flux s. It is possible to attach up to
three Kvick Lab packets to the holder. Inlet and outlet filter tubing in correct dimen-
sions and lengths can be ordered separately from Cytiva.
Illustration
1
2
3
Part
Function
1
Kvick Lab packet
2
Kvick Lab packet holder (front plate)
3
Kvick Lab packet holder (back plate)
Description
The Kvick Lab packet is intended for concentration and diafiltration of small process
volumes.
More information
•
Section 6.2 Install Kvick Lab packet and holder, on page 106
, for more infor-
mation on how to install filter packet and holders.
3 System description
3.5 Filter devices
3.5.2 Kvick Lab packet and holder
50
ÄKTA flux s Operating Instructions 29046893 AG
