2.3
Emergency procedures
Introduction
This section describes how to do an emergency shutdown of ÄKTA flux s, and the result
in the event of power failure.
The section also describes how to restart the system after emergency shut down or
power failure.
Emergency shutdown
Switch off the mains power supply by pushing the power switch to the
0 position (1), or
disconnecting the power cord (2).
Result: The entire system becomes powerless, data is lost or corrupt.
Restart after emergency shut down
or power failure
Follow the instruction below to restart ÄKTA flux s after emergency shut down or
power failure.
Step
Action
1
Make sure that the condition that caused the emergency stop or power
failure is corrected.
2 Safety instructions
2.3 Emergency procedures
26
ÄKTA flux s Operating Instructions 29046893 AG
