CIP tubing
Replace the filter with the CIP tubing during cleaning.
CIP
ÄKTA flux s is cleaned by a CIP procedure with water and NaOH.
Follow the steps below to clean ÄKTA flux s. The steps are described in more detail on
the following pages.
A
Drain the system.
B
Rinse with water.
C
Rinse with water under pressure.
D
Rinse again with water under pressure.
E
Rinse with 0.5 M NaOH.
9 Maintenance
9.2 Sanitization and cleaning
ÄKTA flux s Operating Instructions 29046893 AG
169
