Step
Action
Result:
Level will control start and stop the transfer pump to keep the level of the
tank constant.
4
To stop the function, tap
Lock button and use the displayed keypad to tap
Deactivate.
Note:
The CRV warning function does not stop the filtration process. In order to stop
the process while running in CRV mode, the tank low level alarm should be
activated.
Pf control
The feed pressure can be used to control the feed flow rate. To do this, follow the steps
below.
Step
Action
1
Perform a basic filtration, refer to step 1 to 5 in
Section 7.2.1 Basic filtration,
.
2
Tap
Lock button next to Pf auto on the control panel, set constant pressure
on the keypad that appears and tap
Activate.
3
Tap
Deactivate to stop the feed pressure control.
7 Operation
7.2 Perform a run
7.2.2 Automated features
ÄKTA flux s Operating Instructions 29046893 AG
137
