SPECIFICATIONS
Operating Voltage 12-24VDC, 3x3A (9A peak)
Control Processor PWM, Common Anode
Cutoff Voltage
11.35V
Standby Current
16mA
Transmitter Freq
433MHz
WARRANTY
Cyron warrants this product against any defects in materials or workmanship for a period of ONE (1) year from the date of purchase. The warranty covers normal usage as
intended by the factory and does not cover misuse, abuse, accidents, or damages caused due to the acts of God. Proof of purchase is required.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER
THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL CYRON, INC. BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LO SS
OF REVENUE OR PROFITS, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one
jurisdiction to another. Warranty inquiries can be emailed to [email protected] or mailed to:
CYRON, Inc.
Warranty Claim Dept
21029-C Itasca Street
Chatsworth, CA 91311 USA
Other quality automotive lighting accessories & upgrades available from CYRON
For details please contact your local dealer or visit www.CYRON.com
Part Number
Description/Application
CV62C-[color]
Convex 6LED Cluster, Chrome finish PAIR
CV62-[color]
Convex 6LED Cluster, Black finish PAIR
CV610C-[color]
Convex 6LED Cluster, Chrome finish BULK PACK 10pcs
CV610-[color]
Convex 6LED Cluster, Black finish BULK PACK 10pcs
FL30-[color]
FlexLED super flexible strips, 30LED, 12”
CMF1202
Rigid mount for FlexLED, for ground effect & under bags
CON-TB005
Solder-less Terminal Block, 5 outlet
ABH4K-A6K
Headlight LED bulb retrofit kit, H4
AB881-A6K
Driving Lamp, LED 880, 881 fitting
RC3A12-REM
Spare remote for RC3A12
System diagnostics:
LIGHTS DO NOT TURN ON
Diagnosis
Is the supply voltage connected properly?
Make proper connection to battery terminals
Is the fuse in the fuse holder? Is it the fuse blown?
Check the fuse. Fuse type 5A or 7.5A small blade
Has the remote been paired up with controller?
Take fuse out and plug back in. Within 5 seconds of plugging in press
button "1" on the remote 3 times. All channels should flash 5 times
indicating the remote and controller have been paired. With same
procedure up to two remotes can be learned by the controller. Pairing
up a 3rd remote will erase the first one.
REMOTE NOT FUNCTIONING
Diagnosis
Remote indicator light does not turn on
Check remote battery. Type 27A. Cyron Part# BAT-27A
Remote indicator light stays on
The buttons have been pressed too hard. The silicon rubber buttons
can be put out of alignment if pressed with too much force. Gently rock
the buttons as they are being pressed to set them back in place.
