CHAPTER 28:LCD Controller
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
1075
7.4.
How can I Set the Bias?
This section shows how to set the bias.
<Duty drive>
Set the bias selection bit (LCDCMR: DTCH).
Bias
Bias Selection Bit (DTCH)
To set 1/3 bias
Set "0".
To set 1/2 bias
Set "1".
7.5.
How can I Set the Duty?
This section shows how to set the duty.
<Duty drive>
Set the display mode selection bits (LCR0: MS [1:0]).
Control Detail
Display Mode Selection Bits
(MS[1:0])
N (Time Division Number)
LCD operation stop (Pin output "L")
Set "00".
-
To set 1/2 duty output mode
Set "01".
2
To set 1/3 duty output mode
Set "10".
3
To set 1/4 duty output mode
Set "11".
4
The display mode selection bits are also the control bit for operation start/stop.
7.6.
How can I Control the LCD Operation Start/Stop?
This section shows how to control the LCD operation start/stop.
<Duty drive>
Operation start/stop can be controlled with the display mode selection bits (LCR0: MS [1:0]).
See "7.5 How can I set the duty?".
<Static drive>
Operation start/stop can be controlled with the display mode selection bits (LCRS: LCS [3:0]).
Summary of Contents for S6J3200 Series
