S6E2CC/C5/C4/C3/C2/C1 Series Flash Programming Specification, Document Number: 002-04913 Rev. *D
28
1.3.3.6 Sector Erase Restart Operation
This section explains the operation for restarting sector erase during sector erase suspended.
When the sector erase restart command is issued to an arbitrary address while sector erase is suspended, sector erase
can be restarted.
When the sector erase restart command is issued, the sector erase operation during sector erase suspended is restarted.
See Section "
" for details on the sector erase restart command.
Notes:
−
The sector erase restart command is only valid during sector erase suspended. Even if the sector erase restart
command is issued during sector erase, it is ignored.
−
After the sector erase restart command is issued, it takes more than 2 ms until the sector erase operation is
restarted. Therefore, when erase restart and erase stop are repeated at intervals less than this time, timing limit is
exceeded while no erase operation is in progress. If the sector erase suspended command is to be issued again
after the sector erase restart command is issued, leave an interval more than 2 ms after the sector erase restart
command is issued.
