MB2100-01A-E Single Port Embedded Emulator Debugger SPEED-BOX Operation Guide, Doc. # 002-05542 Rev. *A
13
Product Description
1.5
Specifications
1.5.1
General specifications
Table 1-6 shows the general specifications for the SPEED-BOX.
Table 1-6. SPEED-BOX general specifications
*: This device isolates the power supply system of the host computer from the user system. See the
Section "Power supply isolation specifications" below for details on the power supply isolation.
Item
Specification
Name
SPEED-BOX
Part number
MB2100-01A-E
Power supply
5V / 500mA (USB bus powered)
MDI bus communication scheme
Single wire UART (NRZ or phase-modulated encoding). The
encoding scheme used is determined by the MCU.
MDI bus maximum communication
speed (from MCU to SPEED-BOX)
50Mbps
Does not depend on cable length.
MDI bus maximum
communication speed
(from SPEED-BOX to MCU)
Cable length 2m or less: 25Mbps
Cable length 5m or less: 12.5Mbps
Cable length 10m or less: 6.25Mbps
Host computer communication scheme
USB 2.0 compliant
USB communication speed
(theoretical value)
480Mbps (Hi-Speed),12Mbps (Full-Speed)
Power supply insulation withstand volt-
age*
AC250V / DC250V (may be applied constantly)
Operating temperature
+5
°C
to +40
°C
Operating humidity
20% to 80% (no condensation)
Storage temperature
0
°C
to +70
°C
Storage humidity
20% to 80% (no condensation)
External dimensions
84.8 (D)
53.6 (W)
21.3 (H) mm
(not including connectors, switches, or other protruding parts.)
Weight
70g
