Software Development
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
41
4. Run the Serial Port Viewer, set the baud rate as
115200
, and click the
Disconnected
button
to connect the board with PC, as described in
Figure 4-6: Select the Baud Rate
5. Run the program.
6. The calendar data will be displayed in Serial Port Viewer window.
Figure 4-7: Calendar
4.2.6 Sleep Mode
4.2.6.1 Project Description
This project demonstrates the sleep mode operation of the S6E1C3 device. The MCU will enter
sleep mode after the RGB LED (LED4) blink five times (green color). It can be awakened by
pressing the SW2 switch. After wakeup, the green LED will turn on.
4.2.6.2 Hardware Connection
No specific hardware connections are required for this project. All connections are hardwired on
the board.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
