Software Development
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
40
7. Key in any characters in the Outgoing Data Window, the same characters will be echoed in
the Input Data Window.
Figure 4-5: Echo Test
4.2.5 RTC Calendar
4.2.5.1 Project Description
This project demonstrates the RTC operation of the S6E1C3 device. The program enables the
RTC in calendar mode, and sends out the current calendar through UART0.The calendar starts
from 2015/9/13 23:59:01 Wednesday.
4.2.5.2 Hardware Connection
No specific hardware connections are required for this project. All connections are hardwired on
the board.
4.2.5.3 Verify Output
1. Power the FM0+ S6E1C-Series Starter board from CN3 using USB cable, refer to
2. Open the project file in IAR Embedded Workbench or Keil uVision IDE from the following
directory:
IAR project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo Projects\s6e1c3_rtc\IAR\s6e1c3_rtc.eww.
Keil project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo
Projects\s6e1c3_rtc\ARM\s6e1c3_rtc.uvprojx.
3. Build the project and download the code on the S6E1C3 device.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
