CY3686 EZ-USB
®
NX2LP-Flex™ DEVELOPMENT KIT
QUICK START GUIDE
Unpack the kit contents. Using the CD/DVD
provided in the kit, install the kit contents and
Keil uVision IDE.
Set the switches on the FX2LP base board.
SW2 is set to the EEPROM position and
SW1 is set to the large EEPROM position.
Ensure jumpers J3-J14 and J16 are enabled,
write protect switch SW1 is in the OFF position,
and the NX2LP IC pad U1 is unpopulated.
Stack up the FX2LP base board, the
prototype board (optional), and the NX2LP
flex board. Connect it to the host PC. The
device enumerates as a removable drive
in 'My Computer'. Try transferring data to
and from the drive.
1
2
3
4
