EZ-USB FX3 HD 720p Camera Kit - Quick Start Guide, Rev. 2.0
13
Getting Started
2.5
Connect Camera Kit to PC
1. Connect the Camera Kit to a USB 3.0 port on the PC via a USB 3.0 cable
2. Toggle the switch (
SW9
) on the FX3 DVK to turn it on (LEDs will light up)
Figure 2-6. Toggle the Switch (SW9) to Turn on the FX3 DVK
3. New hardware will be detected and device driver software should be installed automatically.
Figure 2-7. Automatic Detection and Installation of FX3 Device Driver Software
