EZ-USB
®
FX3
TM
SUPERSPEED EXPLORER KIT QUICK START GUIDE
1
2
CYUSB3KIT-003
Step 1: Software Installation
4
Step 3: Driver Installation
Step 4: Observe the Blue LED (LED2)
3
Power
LED
(LED1)
J5
J2
J3
Blue
LED
(LED2)
J4
Download and install the latest Kit Setup
SuperSpeedExplorerKitSetup.exe
from
www.cypress.com/go/SuperSpeedExplorerKit
•
•
•
•
•
•
Make sure that jumpers
J2
and
J3
are
closed, J4 and J5 are open
Connect the board to the computer using the
USB 3.0 cable provided
Power LED glows green when the board is
powered
Step 2: Hardware Connection
•
•
Drivers are installed automatically. The board
enumerates as
Cypress FX3 USB
StreamerExample Device
under Universal
Serial Bus Controllers in Windows Device
Manager
If automatic driver binding does not happen,
follow the note given on the next page to
manually bind the driver
Blue LED blinks if the board is connected to a
USB 3.0 host port
Blue LED stays ON if the board is connected
to a USB 2.0 host port
