CYW943907AEVAL1F Evaluation Kit User Guide, Doc. No. 002-18703 Rev. *B
12
2.
Software Installation
This chapter provides instructions for installing the ModusToolbox software
– a set of tools that enables you to integrate
Cypress devices into your existing development methodology. This is a Beta release of ModusToolbox, and it is only available
through the
ModusToolbox Early Access Program (EAP) website.
2.1 System Requirements
Cypress recommends the following minimum system configuration:
•
CPU with a PassMark score > 2000 (
•
4 GB RAM
•
10% of total disk space with at least 10 GB free
ModusToolbox is
not
supported on 32-bit operating systems. It has been tested on the following:
•
Windows 7 64-bit / Windows 10 64-bit
•
macOS 10.13
•
Ubuntu Linux 16.04 LTS
Notes:
•
For Windows, you must have Microsoft Visual C++ 2017 Redistributable (x64) - 14.14.26429 installed. This is
installed by default with the ModusToolbox Windows installer.
•
For Linux and macOS, ModusToolbox requires the following Unix packages to work properly:
•
make (v3.81)
•
mktemp (v8.25)
•
perl (v5.18.2)
•
cmp (v2.8.1)
Some versions of Ubuntu Linux do not include 'make' by default. Use the command
sudo apt-get install make
to
install it.
2.2 Installation Steps
2.2.1 Step 1: Uninstall Previous Release
Uninstall any previous version already installed before installing this release.
▪
Windows:
The current release installer will prompt you to uninstall a previous release. You can also use the Windows
Control Panel.
▪
Linux:
Go to the directory where you extracted the
tar.gz
installer. Delete the
ModusToolbox_<version>
directory and
its contents.
▪
macOS:
Go to the Applications directory to which you moved the
ModusToolbox_<version>
directory. Delete the
ModusToolbox_<version>
" directory and its contents.
