PC/HD to DVI
Format Converter
Operation Manual
CP-261D
DVI-I OUTPUT
OUTPUT
RGB
Bypass
INPUT
RGB
YPbPr
PC/YPbPr INPUT
DC 5V 2A
The PC/HD to DVI-I format conveter converts analog
PC RGBHV/YPbPr signal to digital DVI signal.
It allows you to connect the analog HD-15 RGBHV/YPbPr output from your PC
or Video equipments to the DVI input of the monitors or projectors.
Its high bandwidth capability supports a wide range of PC and HDTV resolutions.
Features:
* It enables you to connect computers with analog PC output or
DVDs with analog HD output to digital DVI-I monitors or projectors.
* You can select input between analog RGB and YPbPr.
* You can also select output between Bypass or digital RGB.
* Supports up to 1600 x 1200 @ 60 Hz for PC input and 1920 x 1080p @ 60 Hz for HD input.
* Supports DDWG standard for DVI complaint monitors.
Specifications
* Input: Analog HD-15 (RGBHV or YPbPr)
* Input signal:
RGB: 0.7 Vp-p 75 ohm
H + V: 3 to 5 Vp-p
or Y :1 Vp-p 75 ohm,
Pb/Pr: 0.7 Vp-p, 75 ohm
* Output: DVI-I connector
* Output signal: Digital RGB or YPbPr data bistream
* Compliant with DVI Rev 1.0
* Operation frequency: up to 165MHz
* Input/ Output resolution:
PC
：
VGA@60
、
VGA@72
、
VGA@75
、
VGA@85
、
SVGA@60
、
SVGA@72
、
SVGA@75
、
SVGA@85
、
XGA@60
、
XGA@70
、
XGA@75
、
XGA@85
SXGA@60
、
SXGA@75
、
SXGA@85
、
UXGA@60
1152@70
、
1152@75
、
1152@85
HD/RGB
：
480i@60
、
576i@50
、
480p@60
、
576p@50
、
720p@60
、
720p@50
、
1080i@60
、
1080i@50
、
1080p@60
、
1080p@50
、
1080p@30
、
1080p@25
、
1080p@24
* Dimension (WxHxD)
：
76 * 30 * 105mm
* Power
：
5V 500mA~2A Center-positive
Operation Controls and Functions
Front Panel
Rear Panel
Input SW.
Output
Output SW.
Input
YPbPr
RGB
Bypass
RGB
Digital RGB
Digital RGB
Digital RGB
Digital YPbPr
1
2
4
5
6
3
1. HD-15 D-Sub input: Connects to the PC or YPbPr output of your PC or YPbPr
source equipment, using VGA cable, or D-Sub to 3 RCA adaptor cable.
2. DC 5V power input jack.
3. Power LED light.
4. DVI-I output: Connects to the DVI input of your display TV through DVI cable.
5. Input format switch:
- Set the switch to YPbPr when the output format of your source equipment
is component YPbPr. Use VGA to 3 RCA adaptor cable to connect between
your source equipment and the CP-261D.
- Set the switch to RGB when the output format of your source
equipment is RGBHV. Use- HD-15 D-Sub VGA cable to connect
between your source equipment and the CP-261D.
This package includes
- One CP-261D unit.
- One switching power supply adaptor.
- One HD-15 VGA to 3 RCA cable.
- User manual.
Operation Controls and Functions
6. Output format switch:
When the input is YPbPr set the switch to bypass for digital YPbPr out,
set the switch to RGB for digital RGB out.
When the input is RGB, set the switch to either position for the digital RGB out.
There is no YPbPr out for RGB input.
