manualshive.com logo in svg

Cypress Semiconductor GX3 EEPROM, Programming & User Manual, Page: 30 / 50

Share
Download
Cypress Semiconductor GX3 EEPROM Programming & User Manual Download Page 30

 

 

 

30 

Copyright (C) 2011-2012 Reserved by Cypress Semiconductor Corporation 

 GX3 EEPROM Programming User Guide 

 

4-1.

 

Files Description 

 

File Name 

Description 

ProductionTest.exe 

Windows Production Test program. This program should be run on the Test PC. 

TestServer.exe 

Windows Production Server program. This program should be run on the Server PC. 

SETTING.INI 

Windows Production Test configuration data file.  
This file will be auto-created after running ProductionTest.exe. 

TEST.LOG 

Windows Production Test log file. 
This file will be auto-created after running ProductionTest.exe. 

SROM.DAT 

The GX3 SROM data file.  
Users can create this SROM data file by GX3 EEPROM Programming Tool. 

CYUSB3610Test.SYS 

GX3 Windows test driver  

CYUSB3610Test.INF 

GX3 Windows test driver INF file  

Table 9.

 

Windows Production Test Tool Files Description 

 

Note: 

1.  Please uninstall the standard GX3 Windows driver first if it had been installed before. 
2. If your GX3 board has your own VID/PID, please refer to Section 4-5 for more details. 
3. If you had programmed the EEPROM content on your GX3 device, please refer to Section 

4-6 for more details. 

4. Please install GX3 Windows test driver before running the Windows Production Test 

Tool. 

5. The ‘ProductionTest.exe’ tool will auto-load the configuration setting from the 

SETTING.INI file. If the SETTING.INI file does not exist, the ProductionTest.exe tool 
will create this file with default values. 

6. Please make sure the SROM.DAT file is exist before running the Windows Production 

Test Tool. If you don’t have the SROM.DAT file, you can create a proper GX3 SROM 
data file (SROM.DAT) by Windows GX3 EEPROM Programming Tool.  

 

Summary of Contents for GX3 EEPROM



















































Reviews:

No comments