PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B
78
Interrupts
Name
Number
Priority
Notes
PDM Interrupt
140
6
If not using WICED audio API, feel free to
change. If using WICED audio API do not
change.
I2S Interrupt
139
6
If not using WICED audio API, feel free to
change. If using WICED audio API do not
change.
SAR Interrupt
138
6
If not using WICED ADC API, feel free to
change. If using WICED ADC API do not
change.
All SCB Interrupt
41-48
6
Feel free to change as needed
CSD Interrupt
49
5
Feel free to change as needed
Analog Routing
When CapSense is used, analog routing is consumed to connect the pins. The following routing code was
used to create this CapSense configuration:
CY_SET_REG32(CYREG_HSIOM_AMUX_SPLIT_CTL2, 0x00000030u);
CY_SET_REG32(CYREG_HSIOM_AMUX_SPLIT_CTL4, 0x00000033u);
CY_SET_REG32(CYREG_PASS_AREF_AREF_CTRL, 0x80000000u);
Table A-2. WICED Names and their Configuration and Mapping in PSoC 6
WICED Name
PSoC Resource and Configuration
Notes
WICED_LED1
P0.3, Strong Drive
Connects to red LED
WICED_LED2
P1.1, Strong Drive
Connects to green LED
WICED_LED3
P11.1, Strong Drive
Connects to blue LED
WICED_BUTTON1
P0.4, Pull_Up
Connects to SW2
STDIO_UART
SCB5: P5.0, P5.1
8N1 115200
WICED_ADC_1
P10.0
Single Ended (negative input connected to VSSA/2)
Unsigned Result
Consumes 8 Bit divider # 1
WICED_PWM_1
Connected to P0.3
Consumes TCPWM Block 0 Counter 1
Consumes 16 bit divider #14
Red LED
WICED_PWM_2
Connected to P1.1
Consumes TCPWM Block 0 Counter 3
Consumes 16 bit divider #14
Green LED
WICED_PWM_3
Connected to P11.1
Consumes TCPWM Block 1 Counter 1
Consumes 16 bit divider #14
Blue LED