Cypress Semiconductor CY8CKIT-062-WiFi-BT, Manual, Page: 25 / 86

PSoC 6 WiFi-BT Pioneer Kit Guide, Doc. # 002-22677 Rev. *B 25
WICED
Figure 3-1. Installer Window Screenshot
3.4 Programming and Debugging in WICED
3.4.1 Building and Programming a Project for CY8CKIT-062-WiFi-BT in WICED Studio
IDE
To build and program a project for CY8CKIT-062-WiFi-BT, perform the following steps:
1. To open the WICED IDE on the Windows PC, go to
Start > All Programs > Cypress > WICED-
Studio .
2. Select 43xxx_Wi-Fi in the WICED Target selector drop-down box as shown in Figure 1-7 . Build-
ing a project requires a corresponding make target, located in the Make Target window. All appli-
cations go under the
apps directory. The make target path will contain the directory hierarchy
starting from apps with directory names separated by a period. The project name is followed by a
hyphen and then the platform name. Finally, the actions to be performed after the build are spec-
ified, such as download and run. For example, to build, download, and run the application scan
which exists in
apps\snip\scan , create the following make target:
snip.scan-CY8CKIT_062 download_apps download run
This project will periodically scan for Wi-Fi access points and will list them using the serial-to-USB
connection on the kit.
Perform these steps to create the make target, build, program, and test application scan:
3. Right-click 43xxx_Wi-Fi in the Make Target window as shown in Figure 3-2 and click New .