3 – 46
© 2018 Cyphre Security Solutions, LLC.
3.9 Connecting the BT1 to a Network
The P4080 chip, the main CPU, is a Freescale SOC (system-on-a-chip). The P4080 Ethernet
subsystem has multiple speeds. Because the Freescale CPU is very configurable, it has been
configured with 2 x 10 Gb Ethernet ports.
The BT1 includes 2 - 10 Gb and 2 - 1/10/100 Gb RJ-45 Ethernet connectors.
l
Enet 1 (eth0) 1/10/100 Gb
l
Enet 2 (eth1) 1/10/100 Gb
l
Enet 3 (eth2) 10 Gb
l
Enet 4 (eth3) 10 Gb
eth0
eth1
eth2
eth3
10/100/1G
10G
Figure 3 - 18: BT1 Ethernet Ports
To connect the BT1 to a network follow this procedure:
1.
Access the System Setup utility. (Requires restart and following the screen prompt.)
2.
Navigate to the Boot screen. "Network Configuration: Machine IP " on page 142.
3.
Under Network Configuration, select Machine IP, and press Enter.
4.
Enter the desired IP in IPV4 format, <xxx.xxx.xxx.xxx>.
5.
Press
Enter
to save the your changes.
Confidential
BT1 Security Appliance User Guide
3 BT1 Installation
