CYP PUV-1820TX-AVLC, Operation Manual

Page: 10 / 28

10
6.2 Rear Panel
HDMI IN HDMI CAT5e/6/7
A B
OUT
LAN IR IN IR OUT RS-232 DC 24V
7 6 5 4 13 2 1
1 DC24V Port:
Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
2
RS-232 Port: Connect to a PC, laptop, or serial controllable device for
the extension of RS-232 signals between both ends of the HDBaseT
connection or to control this unit directly.
Note: The behavior of the RS-232 port is controlled by the front panel
CONTROL/BYPASS switch.
3 IR OUT Port:
Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
4 IR IN Port:
Connect to an IR Extender to receive IR control signals and
extend them to devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-of-
sight of the IR Extender.
5
LAN Port: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
6
OUT A (CAT5e/6/7) Port: Connect to a compatible HDBaseT Receiver
with a single Cat.5e/6/7 cable for transmission of all data signals. 48V
PoH will also be supplied to a connected compatible PD Receiver.
OUT B (HDMI) Port:
Connect to an HDMI TV, monitor, or amplifier for
digital video and audio output.
7 HDMI IN Port:
Connect to HDMI source equipment such as a media
player, game console, or set-top box.