CYP CPRO-U2T, Operation Manual, Page: 8 / 16

3
5 SYS-RST SWITCH: Controls the CEC “active source” reset
functionality of the unit. When switched to the “ON” position
the unit will send a CEC active source reset command to all
connected displays every 8~10 minutes. This command requests
that any connected CEC compliant TVs switch to the input the unit
is connected on.
Note: The connected TV must have CEC support enabled. Not all
HDMI TVs support this CEC command.
6
SERVICE: This slot is reserved for firmware update use only.
6.2 Rear Panel
DC 5V
OUT
IN 1 2
1 2 3
1
DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2 IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
3
OUT 1~2: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.